Silicon Laboratories SiM3U1xx Manual do Utilizador descarregar pdf (Página 16)

AN726

16 Rev. 0.1

5.9. Build Configurations

The Precision32 and uVision projects include two build configurations each: Release and Debug. These

configurations change the code optimization settings. In addition, each configuration sets a flag to allow the

firmware to automatically detect the current build configuration and IDE. This enables the firmware to modify the

play/record flash mode array size to appropriate settings based on the code size. The approximate sizes for each

build configuration are shown in Table 4.

To change the active build configuration in the Precision32 IDE, right-click on the project name in the Project view

and select Build Configurations

Set ActiveDebug or Release.

Figure 18. Setting the Active Precision32 IDE Build Configuration

Table 4. Build Code Size Comparisons

IDE Build Code Size (bytes)

Precision32 Debug 68200

Release 47200

uVision4 Debug 40200

Release 34700

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Sem comentários

Silicon Laboratories SiM3U1xx Manual do Utilizador Página 16